£7.75 delivery on orders excluding certain products & postcodes *
Carboline | Hempel | International Paints | Jotun | PPG | Sherwin Williams
Guide To Working In Confined Spaces
Rapid / low temperature curing inorganic zinc product suitable for C3 - CX and immersion environments.
A fast-curing, heavy duty, high-build anti-corrosive coating for marine and other corrosive environments.
A versatile tank lining suitable for low temperature application down to 2°C. NORSOK 7a Approved.
A glass reinforced chemically resistant epoxy coating with wide versatility in all industrial markets.
Formulated specifically to provide corrosion protection for the subsea market.
A fast drying, rapid recoat, metallic zinc-rich epoxy primer. Replacement for Interzinc 52.
A two component protective coating for use in high traffic, atmospheric and immersed environments.
A single pack polysiloxane topcoat formulated to give a cosmetic finish with superior colour and gloss retention. NORSOK approved.
A two component surface tolerant, high solids, high build coating. NORSOK approved.
A two component, high solids polyamine adduct cured zinc rich epoxy primer. Meets Norsok M-501 Rev. 6, System 1.
This product is now discontinued. See Hempel Hempadur 15570 as a potential alternative.
Two component high solids, high build, polyamide cured epoxy coating designed for general purpose protection to steel and concrete structures.
A 2 pack high build semigloss aliphatic acrylic polyurethane finish, Highways Approved Item No.169.
WRAS Approved for drinking water. A two component solvent free amine cured epoxy coating.
A two component amine adduct cured phenolic epoxy finish designed to provide a finish coat as part of a coating system used for the protection of subs...
Formerly Amercoat 340. A two component, abrasion resistant, solvent free, amine cured, phenolic epoxy coating.
A two component high build heat resistant phenolic epoxy coating designed for use under insulation systems to provide heat protection of up to 230°...
A high solids, 2 pack epoxy containing micronised glass flake and anti corrosive pigments suitable for use on blast cleaned and cathodically protected...
Transgard TG121/Epigrip K267 two pack epoxy high solids Micaceous Iron Oxide (MIO) Highway Agency Item No.121. N9/038 Protective system reference
A high solids 2 pack epoxy, pigmented with glass flakes and anti corrosives for use on steel. Network Rail Item 7.2.3. Highways Agency Item No.123
A multi functional epoxy coating suitable for the protection of steelwork in a range of exposure environments from C1 to C5.
A 2-part, polyurethane topcoat, with good gloss and colour retention. BBA Cert No. 08/H135-PS13. Highways Approved Item No.169.
Approved potable water, solvent-free, high-build, polyamine adduct cured epoxy paint.
A 2 pack epoxy zinc phosphate primer suitable for the anti corrosive protection of carbon steel surfaces.
Used as a temporary protective coating for steel surfaces prepared by abrasive blast cleaning.
A water based, quick drying gloss acrylic finish or sealercoat for Sherwin Williams FX Firetex intumescent product range.
A two component surface tolerant, long lasting corrosion protection for carbon steel and aged coatings found in severe environments.