NORSOK Approved Paints

Home
Marine Paints / Cleaners
NORSOK Approved Paints

Download the manufacturer specifications for NORSOK M-501 certified systems below:

Carboline Carbozinc 11
Rapid / low temperature curing inorganic zinc product suitable for C3 - CX and immersion environments.

From £257.04 £214.20
Carboline Carbomastic 18 FC
A fast-curing, heavy duty, high-build anti-corrosive coating for marine and other corrosive environments.

From £106.20 £88.50
Carboline Phenoline 353 LT
A versatile tank lining suitable for low temperature application down to 2°C. NORSOK 7a Approved.

From £313.80 £261.50
Carboline Carboguard 890 GF
A glass reinforced chemically resistant epoxy coating with wide versatility in all industrial markets.

From £132.30 £110.25
International Intertherm 3070
Formulated specifically to provide corrosion protection for the subsea market.

From £773.83 £644.86
International Interzinc 52E
A fast drying, rapid recoat, metallic zinc-rich epoxy primer. Replacement for Interzinc 52.

From £347.63 £289.69
Jotun Jotamastic 87 GF Wintergrade
A two component protective coating for use in high traffic, atmospheric and immersed environments.

From £356.18 £296.82
Jotun Hardtop One
A single pack polysiloxane topcoat formulated to give a cosmetic finish with superior colour and gloss retention. NORSOK approved.

From £210.88 £175.73
Jotun Jotamastic Smart Pack HB
A two component surface tolerant, high solids, high build coating. NORSOK approved.

From £141.70 £118.08
PPG SigmaZinc 68 GP
A two component, high solids polyamine adduct cured zinc rich epoxy primer. Meets Norsok M-501 Rev. 6, System 1.

From £267.84 £223.20
*PPG SigmaCover 240 Formerly Amercoat 240
This product is now discontinued. See Hempel Hempadur 15570 as a potential alternative.

In stock
PPG SigmaCover 410 MIO
Two component high solids, high build, polyamide cured epoxy coating designed for general purpose protection to steel and concrete structures.

From £324.00 £270.00
PPG SigmaDur 520
A 2 pack high build semigloss aliphatic acrylic polyurethane finish, Highways Approved Item No.169.

From £91.20 £76.00
PPG PSX 700 Engineered Siloxane
For steel from PPG Sigma, Ameron. Highways Approved Item No.185.

From £373.15 £310.96
PPG SigmaGuard CSF 585
WRAS Approved for drinking water. A two component solvent free amine cured epoxy coating.

From £126.72 £105.60
PPG Phenguard Subsea 780 - Formerly SigmaLine 780
A two component amine adduct cured phenolic epoxy finish designed to provide a finish coat as part of a coating system used for the protection of subs...

From £201.89 £168.24
PPG SigmaShield 1200 Formerly Amercoat 340
Formerly Amercoat 340. A two component, abrasion resistant, solvent free, amine cured, phenolic epoxy coating.

From £733.82 £611.52
PPG SigmaTherm 230 Phenolic Epoxy
A two component high build heat resistant phenolic epoxy coating designed for use under insulation systems to provide heat protection of up to 230°...

From £499.87 £416.56
Sherwin Williams Macropoxy M922 - Formerly Transgard TG123 Epigrip
A high solids, 2 pack epoxy containing micronised glass flake and anti corrosive pigments suitable for use on blast cleaned and cathodically protected...

From £175.52 £146.27
Sherwin Williams Macropoxy K267 MIO - Formerly Leighs Transgard TG121 Macropoxy 1210
Transgard TG121/Epigrip K267 two pack epoxy high solids Micaceous Iron Oxide (MIO) Highway Agency Item No.121. N9/038 Protective system reference

From £118.08 £98.40
Sherwin Williams Macropoxy C123 - Formerly Leighs Epigrip C123
A high solids 2 pack epoxy, pigmented with glass flakes and anti corrosives for use on steel. Network Rail Item 7.2.3. Highways Agency Item No.123

From £134.86 £112.38
Sherwin Williams Macropoxy 400 - Formerly Leighs Epigrip C400V3
A multi functional epoxy coating suitable for the protection of steelwork in a range of exposure environments from C1 to C5.

From £138.97 £115.81
Hempel Hempathane HS 55610
A 2-part, polyurethane topcoat, with good gloss and colour retention. BBA Cert No. 08/H135-PS13. Highways Approved Item No.169.

From £76.32 £63.60
Hempel Hempadur 35560 - WRAS Approved
Approved potable water, solvent-free, high-build, polyamine adduct cured epoxy paint.

From £387.55 £322.96
Sherwin Williams Macropoxy L425 - Formerly Leighs Epigrip
A 2 pack epoxy zinc phosphate primer suitable for the anti corrosive protection of carbon steel surfaces.

From £158.24 £131.87
Sherwin Williams Macropoxy L574 - Formerly Leighs Metagard
Used as a temporary protective coating for steel surfaces prepared by abrasive blast cleaning.

From £110.02 £91.68
Sherwin Williams Sher-Cryl M770 - Formerly Leighs Envirogard
A water based, quick drying gloss acrylic finish or sealercoat for Sherwin Williams FX Firetex intumescent product range.

From £149.52 £124.60
Jotun Jotamastic 87 Aluminium
A two component surface tolerant, long lasting corrosion protection for carbon steel and aged coatings found in severe environments.

From £83.80 £69.83

System 1 (pre-qualified)	Carbon steel with maximum operating temperature < 120°C (248°F) Structural steel Exteriors of equipment, vessels, piping and valves (not insulated)
System 2	Carbon steel surfaces exposed to operating temperatures > 120°C (248°F)
System 3A-3G (System 3B pre-qualified)	Internal surface of carbon steel tanks
System 4 (pre-qualified)	Walkways, escape routes and lay down areas
System 5A (pre-qualified)	Epoxy-based fire protection
System 5B (pre-qualified)	Cement-based fire protection
System 6A	Uninsulated stainless steel when painting is required. Aluminum when painting is required
System 6B	Hot-dipped, galvanized steel when painting is required
System 6C	Insulated stainless steel piping and vessels at temperatures < 150°C (302°F)
System 7A (pre-qualified)	Carbon and stainless steel in the splash zone
System 7B (pre-qualified)	Submerged carbon and stainless steel ≤ 50°C (122°F)
System 7C (pre-qualified)	Submerged carbon and stainless steel > 50°C (122°F)
System 8a	Structural carbon steel with maximum operating temperature ≤ 80°C (176°F) in internal and fully dry and ventilated areas
System 8b	Structural carbon steel with maximum operating temperature ≤ 80°C (176°F) in fully dry and ventilated areas
System 9	Bulk-supplied carbon steel valves with maximum operating temperature up to 150°C (302°F)