Full Product Catalogue

A two-component multi-purpose neutral-coloured epoxy formulate in water dispersion to create vapour-permeable coatings on industrial floors.

Protects the surface of concrete floors or walls against capillary penetration of water.

Two-component, flexible cementitious mortar for waterproofing concrete surfaces subject to both positive and negative water pressure.

A silicon resin based primer in water dispersion to be used to regulate the absorption of the substrate before applying Silancolor Paint.

A rapid-setting fibre-reinforced structural cementitious mortar, applied in a single layer from 3 to 40 mm thick, for repairing and smoothing concrete...

Two-component water-based epoxy coating with a shiny finish, for concrete floors and cementitious substrates, to provide an anti-dust, oil resistant f...

A ready to use, UV resistant, long-lasting, acrylic paint for internal and external use.

Two- component, transparent epoxy impregnator for water dispersion.

Recommended for protecting marble, granite or natural stone facings against graffiti drawn with spray-paint, crayons, markers, etc.

Recommended for all surfaces not previously treated with graffiti-repellent protection against conventional spray-paints.

Acrylic resin undercoat in water dispersion to even out the absorption of substrates before applying other products.

A solvent-based fixing primer with high penetration properties for porous substrates and curing agent for repair mortars.

An easy to use general purpose bitumen waterproofing emulsion for cold waterproofing masonry and concrete vertical and sloping surfaces.

A single pack, solvent free, moisture curing, rapid drying polyurethane membrane, with low VOC's, for waterproofing cementitious screeds.

Two-component, rapid drying elastic cementitious mortar for waterproofing terraces and balconies, even at at low temperature.

A general purpose non-shrink grout.

An odourless water solution cleaning product for the hygiene of walls.

R2-class, rapid-setting shrinkage compensated thixotropic, fibre-reinforced, cementitious mortar. Apply in a single layer from 3 to 40mm thick.

2 pack fillerized epoxy primer. For use prior to a range of 1 or 2 pack floor paints or epoxy / PU resin systems.

A protective acrylic waterproof coat. For surfaces which are in permanent contact with water, inc flat roofs and water tanks.

A silane and siloxane based primer to even out absorption of substrates. For overcoating with the Silancolor Plus range.

A ready to use protective finishing coat. Resists the growth of mould, mildew and fungi on interior and exterior walls.

A one pack, modified potassium silicate mineral plaster in paste form available in different grain sizes for interior and exterior finishings.

A flexible, water repellent, mould / algae resistant elastomeric hygienic plaster. For internal / external walls.

A kiln dried quartz sand for use with Mapei epoxy and polyurethane resins.

A polymer modified cement based textured render finish supplied in powder form to be mixed with water. For winter use.

Quick-setting, fibre-reinforced cementitious mortar for internal and external floors and walls. Apply from 3 to 30mm.

Self-levelling industrial floor screed based on special hydraulic binders for abrasion-resistant flooring. From 5 to 40mm.