Full Product Catalogue

A self-primed, surface tolerant coating with low temperature curing properties, low VOC and high film build.

A protective enamel coating for structures found in severe atmospheric conditions and is Network Rail approved.

A two-component, polyamide adduct cured epoxy paint with good wetting properties and low water permeability.

A two component, lightweight epoxy filler for boat hulls.

An ultra high solids and very low VOC epoxy coating.

A two component polyurethane paint with good gloss retention and colour stability.

A high build epoxy paint suited for application at low temperatures.

A non-skid coating for steel decks and concrete in corrosive environments.

A two pack epoxy varnish with good penetration properties, for use in cold climates.

A self-priming pure epoxy paint which cures to a corrosion resistant coating.

A two component epoxy filler for profiling large areas of yachts above and below the waterline.

A self-priming epoxy with good impact and abrasion resistance. BBA Cert. no. 08/H135-PS1. Highways Approved Item No.123.

An intermediate or finishing coat epoxy system for use in atmospheric exposures. BBA Cert No.08/H135-PS7. Highways Approved Item No.112

A 2-part, polyurethane topcoat, with good gloss and colour retention. BBA Cert No. 08/H135-PS13. Highways Approved Item No.169.

A two-component polyamide adduct cured, high build epoxy paint. BBA Cert No. 08/H135-PS6. Highways Approved Item No.111

Approved potable water, solvent-free, high-build, polyamine adduct cured epoxy paint.

A two-component, solvent-borne, self-curing, inorganic zinc silicate with outstanding resistance against weathering and abrasion.

A versatile primer for long-term protection of steel in severely corrosive environments.

A universal epoxy and self-primed high performance coating system.

A universal pure epoxy and self-primed high performance coating system for atmospheric or in water service.

Suitable for use as a finishing coat for protection of structural steel.

A two-component epoxy polyamide shop primer, pigmented with zinc phosphate rust-inhibiting pigments.

A two-component, solvent borne zinc ethyl silicate shop primer, designed for automatic spray application.

A two-component epoxy paint, that cures to a flexible, well adhering coating with good abrasion and impact resistance.

A two-component epoxy primer coating especially for use on surfaces exposed to severe abrasion.

A two-component, activated zinc epoxy primer in compliance with the requirements for Level 3, type II in SSPC Paint 20, 2002.

A two-component epoxy paint, which combines high volume solids with a short drying time. Contains zinc phosphate for better corrosion protection.

A two-component, epoxy high build solvent based primer and undercoat. Ideal for the prevention and repair of osmotic blistering in glass fibre.