Full Product Catalogue

Formerly Resutop Clear / Resucoat HB. A two-pack solvent-free high-performance clear floor coating for industrial floors.

Formulated as a scratch coat primer for use prior to the application of screeds and coating systems.

3 Pack product, ideal for rapid repair of concrete surfaces in heavy duty environments.

A two-component epoxy resin primer that is tolerant of residual moisture in concrete floors.

A two pack water based epoxy floor coating with excellent adhesion to green concrete and wood.

A two pack water based epoxy floor / wall coating with excellent adhesion to green concrete and wood.

Provides a tough and durable floor protection finish, that will cure down to low temperatures.

A solvent based, specially formulated product to use alongside compatible Sherwin Williams products.

A two pack epoxy, zinc free prefabrication primer formulated as a temporary protective coating for steel surfaces prepared by abrasive blast cleaning....

A durable 2 pack epoxy high build gloss finish for interior or exterior use, suitable for concrete floors.

A high performance, fast drying, acrylic urethane exterior gloss with good colour retention. N9, M24, M34 and Item No.168. approved.

A high performance fast drying acrylic urethane sheen finish for use where long term exterior colour retention characteristics are required.

A high build, 2 pack epoxy, zinc phosphate primer buildcoat for the anti corrosive protection of carbon steel surfaces.

A high solids, 2 pack epoxy containing micronised glass flake and anti corrosive pigments suitable for use on blast cleaned and cathodically protected...

Transgard TG121/Epigrip K267 two pack epoxy high solids Micaceous Iron Oxide (MIO) Highway Agency Item No.121. N9/038 Protective system reference

Transgard TG116 two pack epoxy undercoat for abraded surfaces. Highways Item 116.

A high performance 2 pack single coat shop applied protective finish for structural steel that will not normally require further site coats.

A high solids 2 pack epoxy, pigmented with glass flakes and anti corrosives for use on steel. Network Rail Item 7.2.3. Highways Agency Item No.123

A multi functional epoxy coating suitable for the protection of steelwork in a range of exposure environments from C1 to C5.

A single pack, high quality alkyd gloss finish for interior and exterior equipment and structural steelwork.

A single pack, shop applied, quick drying, acrylic modified, anti corrosive protective gloss finish for use on internal and external structural steel....

A conventional quick drying undercoat / tiecoat developed for marine use on above waterline areas.

A winterfast hi build undercoat formulated for low temperature curing down to 0°C.

A decorative sheen top coat designed for internal environments over Sherwin Williams intumescent primers.

A highly durable, silicone alkyd high gloss finish designed for external marine superstructures.

A 2 pack epoxy undercoat, pigmented with MIO (micaceous iron oxide). Network Rail Item No. 7.2.2 and 7.1.7.

A high build, 2 pack epoxy, zinc phosphate primer / build coat for the anti corrosive protection of carbon steel surfaces. LUL, M24, N20, M20, approve...

A 2 pack epoxy zinc phosphate primer suitable for the anti corrosive protection of carbon steel surfaces.