£9.95 delivery on orders excluding certain products & postcodes *
A two component fast drying coating. Can be applied on steel, aluminium and concrete at sub zero surface temperatures.
A two component fast drying coating. Can be applied on steel, aluminium and concrete at sub zero surface temperatures.
A tintable single component waterborne acrylic fast drying emulsion coating for both interior and exterior use.
Bollom Brosteel Ultra 60 intumescent paint fire proof paint for steelwork. Provides up to 60 minutes resistance.
A rust inhibiting primer which is suitable for finishing with both single and 2-pack paints and finishes.
A quick drying, gloss, brush applied container and skip metal paint.
A two component polyurethane paint with good gloss retention and colour stability.
An industrial detergent used for degreasing oily or soiled surfaces prior to painting.
A two component, high solids, low VOC, epoxy zinc phosphate/micaceous iron oxide primer.
Suitable for use as a finishing coat for protection of structural steel.
A two-component, glossy acrylic polyurethane coating for use onto structural steel in severely corrosive environments.
A pre-treatment etch solution for new galvanised steel. BBA Cert. no. 08/H135-PS10. Highways Approved Item No. 155
A high gloss coach enamel available in historic colours.
Formally Amercoat 385 PA. A high build poly amide cured zinc phosphate epoxy primer.
A two component epoxy for use as a primer or coating for steel and concrete structures. Highways Approved Item No. 116
A single pack, high quality alkyd gloss finish for interior and exterior equipment and structural steelwork.
Anti Corrosive red oxide paint for Gates, Railings Tanks and General Steel Work.
A two component topcoat for the protection of structural steel in severely corrosive atmospheric environments.
A high-performance, water based acrylic floor paint for floors, driveways and paths. Recoatable in just 1 hour.
A high build quick air-drying oxide primer for use on ferrous metals.
Removes grease, dirt and other contaminants from coated, mineral and steel substrates, prior to decoration.
A general purpose, versatile paint offering economical protection and decoration for the maintenance of structural steel, cladding etc.
A high performance 2 pack single coat shop applied protective finish for structural steel that will not normally require further site coats.
A single pack, shop applied, quick drying, acrylic modified, anti corrosive protective gloss finish for use on internal and external structural steel....
A 2-part, polyurethane topcoat, with good gloss and colour retention. BBA Cert No. 08/H135-PS13. Highways Approved Item No.169.