Full Product Catalogue

A two component fast drying coating. Can be applied on steel, aluminium and concrete at sub zero surface temperatures.

A two component fast drying coating. Can be applied on steel, aluminium and concrete at sub zero surface temperatures.

A tintable single component waterborne acrylic fast drying emulsion coating for both interior and exterior use.

Bollom Brosteel Ultra 60 intumescent paint fire proof paint for steelwork. Provides up to 60 minutes resistance.

A rust inhibiting primer which is suitable for finishing with both single and 2-pack paints and finishes.

A quick drying, gloss, brush applied container and skip metal paint.

Single Pack Primer for Steel, Aluminium and Zinc surfaces.

A fast drying anti-corrosive primer for steel surfaces.

A two component polyurethane paint with good gloss retention and colour stability.

An industrial detergent used for degreasing oily or soiled surfaces prior to painting.

A two component, high solids, low VOC, epoxy zinc phosphate/micaceous iron oxide primer.

Suitable for use as a finishing coat for protection of structural steel.

A two-component, glossy acrylic polyurethane coating for use onto structural steel in severely corrosive environments.

A pre-treatment etch solution for new galvanised steel. BBA Cert. no. 08/H135-PS10. Highways Approved Item No. 155

Formally Amercoat 385 PA. A high build poly amide cured zinc phosphate epoxy primer.

A high build polyamide cured recoatable epoxy coating.

A two component epoxy for use as a primer or coating for steel and concrete structures. Highways Approved Item No. 116

A single pack, high quality alkyd gloss finish for interior and exterior equipment and structural steelwork.

A two component topcoat for the protection of structural steel in severely corrosive atmospheric environments.

A high-performance, water based acrylic floor paint for floors, driveways and paths. Recoatable in just 1 hour.

A high build quick air-drying oxide primer for use on ferrous metals.

Removes grease, dirt and other contaminants from coated, mineral and steel substrates, prior to decoration.

A high performance 2 pack single coat shop applied protective finish for structural steel that will not normally require further site coats.

A single pack, shop applied, quick drying, acrylic modified, anti corrosive protective gloss finish for use on internal and external structural steel....

A 2-part, polyurethane topcoat, with good gloss and colour retention. BBA Cert No. 08/H135-PS13. Highways Approved Item No.169.

A fast drying, two part amine cured epoxy zinc phosphate pigmented, high solids, high build product formulated for exposed structural steel.

A 2 pack semi-gloss acrylic polyurethane topcoat, cured with aliphatic isocyanate, with good gloss and colour retention.

A high build, fast drying corrosion inhibiting primer for structural steel in grey, red and other colours.