Full Product Catalogue

A protective enamel coating for structures found in severe atmospheric conditions and is Network Rail approved.

A solvent based 2 pack PU applied without a primer to glass splash backs, plant, agricultural equipment, plastics etc.

A single pack topcoat that will resist temperatures up to 600°C and can be applied direct to steel.

A white spirit based, single pack quick drying primer for the protection of metal against corrosion.

Zinga 500ml 96% Zinc aerosol with all the protection of Zinga 96% Zinc Cathodic Protection.

Anti corrosion system designed to withstand severe conditions and high temperatures up to 600° C.

A 100% acrylic resin, high performance primer coat designed for use under Bedec Aqua Advanced.

A two-component, polyamide adduct cured epoxy paint with good wetting properties and low water permeability.

A self curing solvent based zinc silicate coating for the protection of blast cleaned steel surfaces up to 400°C.

A 2 pack epoxy zinc rich anti corrosive primer for the protection of blast cleaned steel.

A tough anti-slip aliphatic polyurethane floor coating, which forms a colour-fast, abrasion and weather resistant film.

A unique new water based metal primer that can be used on most metal surfaces internally and externally, prior to painting.

Immersion grade coating for steel and stainless steel. Cures down to 5°C. Tintable to a huge range of RAL and BS shades.

Immersion grade primer for use within a system for steel and stainless steel. Cures down to 5°C.

A single pack silicone acrylic heat resistant finish suitable for high temperature exposures up to 260°C on steel.

A single pack silicone high performance finish for areas exposed to extreme temperatures. Suitable for service from 204°C - 540°C.

Offers exceptional barrier protection and resistance to wet/dry cycling at elevated temperatures.

A single pack medium to high temperature coating that withstands continuous temperature up to 400ºC, and peaks up to 540°C.

Rapid / low temperature curing inorganic zinc product suitable for C3 - CX and immersion environments.

A quick drying, gloss, brush applied container and skip metal paint.

A fast-curing, heavy duty, high-build anti-corrosive coating for marine and other corrosive environments.

A versatile tank lining suitable for low temperature application down to 2°C. NORSOK 7a Approved.

A two pack corrosion resistant metal primer formulated as a weldable pre-construction primer or field or shop applied primer.

A glass reinforced chemically resistant epoxy coating with wide versatility in all industrial markets.

A two pack, high solid aluminium pigmented, low temperature curing modified epoxy mastic.

Two pack polyamide cured, zinc rich coating suitable for structural steel and piping exposed in corrosivity categories up to C5.

A water-borne anti-corrosive semi-matt paint for direct to metal application. Available in a huge range of stock colours, tintable to thousands of sha...

Intended to provide high corrosion protection, with a rapid cure in a single coat scheme.