NORSOK Approved Paints

A 2 component high solids rapid drying zinc phosphate epoxy Primer and build coat that has been formulated to cure at low temperatures down to -5°...

A self curing solvent based zinc silicate coating for the protection of blast cleaned steel surfaces up to 400°C.

Formally Jotun Penguard Tie Coat. A two component, polyamide cured, high molecular weight epoxy coating, specially designed as a tie coat / sealer.

Low temperature curing, two component coating, providing protection in atmospheric and immersed environments.

A two component, high build, amine adduct-cured novolac phenolic epoxy primer for subsequent coats of PPG Phenguard Subsea 780.

Specially designed as a universal, all round, new construction coating. Can be used as primer, mid coat, finish coat or as single coat system.

A high build, 2 pack epoxy, zinc phosphate primer / buildcoat for the anti corrosive protection of steel.

A 2 part surface tolerant high solid glass flake epoxy coating primarily designed for use in offshore splash zone maintenance.

A high solids 2 pack epoxy, pigmented with MIO (Micaceous Iron Oxide) certified under Highways Agency No112.

A two pack, solvent free, thick film epoxy exterior intumescent coating that provides passive hydrocarbon fire protection for up to 4 hours on structu...

A 1 pack inert multipolymeric matrix coating that outperforms alternatives in combating corrosion under insulation (CUI) and in high heat applications...

A flake filled MIO amine cured epoxy phenolic novolac formulated for use under thermal insulation at elevated or cryogenic temperatures.

A 2 part polyamine cured epoxy coating with good chemical resistance formulated for use as a primer, mid coat or finish coat.

A two component epoxy coating for carbon and shop primed steel and coated surfaces. Can be applied at sub zero surface temperatures.

A 2 pack high build anti-corrosive epoxy mastic which can be applied in high film thicknesses for smaller maintenance and repair jobs.

A two component surface tolerant, long lasting corrosion protection for carbon steel and aged coatings found in severe environments.

A two component solvent free amine cured epoxy coating. It is specially designed for potable drinking water tanks.

A 3 part, high solids, surface tolerant, abrasion resistant anti-corrosive epoxy coating with a selected blend of fused aluminium oxide.

An 2 pack epoxy zinc rich anti corrosive primer for the protection of steel surfaces.

A two component, glass flake reinforced novolac vinyl ester coating for new or old steel with excellent resistance to high temps and solvents.

A one component physically drying silicone acrylic coating that is heat resistant up to 600°C.

A two component chemically curing epoxy coating that is a shop primer designed for high welding and cutting speed, giving reduced weld porosity and ba...

A low film build anti-corrosive primer for application to steel substrates. Network Rail/Railtrack approved. Highways Approved Item No. 109

A two-component, glossy acrylic polyurethane coating for use onto structural steel in severely corrosive environments.

A two-pack polysiloxane topcoat with excellent gloss and colour retention. Network Rail/Railtrack approved. Highways Approved Item No. 185.

A two component chemically curing high gloss aliphatic acrylic polyurethane coating that offers resistance to UV degradation and good chemical resista...

A versatile high performance polyamide cured epoxy designed to fulfil the needs of both new construction and maintenance painting to steel, aluminium ...

A two pack isocyanate free finish based on an acrylic epoxy binder system. NORSOK M501 Rev 6 System 1.