£7.75 delivery on orders excluding certain products & postcodes *
Carboline | Hempel | International Paints | Jotun | PPG | Sherwin Williams
Guide To Working In Confined Spaces
This product is now discontinued. See Hempel Hempadur 15570 as a potential alternative.
A 2 pack high build semigloss aliphatic acrylic polyurethane finish, Highways Approved Item No.169.
Transgard TG121/Epigrip K267 two pack epoxy high solids Micaceous Iron Oxide (MIO) Highway Agency Item No.121. N9/038 Protective system reference
Used as a temporary protective coating for steel surfaces prepared by abrasive blast cleaning.
A two component surface tolerant, long lasting corrosion protection for carbon steel and aged coatings found in severe environments.
A 2 component high solids rapid drying zinc phosphate epoxy Primer and build coat that has been formulated to cure at low temperatures down to -5°...
This product is now discontinued. See Jotun Marathon 550 as a potential alternative.
Low temperature curing, two component coating, providing protection in atmospheric and immersed environments.
A 2-part, polyurethane topcoat, with good gloss and colour retention. BBA Cert No. 08/H135-PS13. Highways Approved Item No.169.
A single pack silicone high performance finish for areas exposed to extreme temperatures. Suitable for service from 204°C - 540°C.
A fast-curing, heavy duty, high-build anti-corrosive coating for marine and other corrosive environments.
A two component acrylic polyurethane finish giving excellent durability and long term recoatability.
A two pack, epoxy acrylic isocyanate free cosmetic finish providing good long term durability as a finish coat.
A high build, high performance, two component epoxy with excellent chemical and abrasion resistance.
A quick drying two component epoxy primer for immersed or exposed conditions within a system.
This product is now discontinued. See Hempel Hempaline Defend 630 as a potential alternative.
Suitable for use as a finishing coat for protection of structural steel.
This product is now discontinued. See PPG Sigmacover 350 as a potential alternative.
A two component high build polyamine adduct cured epoxy coating. Primarily designed for use in offshore splash zone maintenance.
Designed for use within certain International Paints to provide a safe anti slip finish to walkways.
A two-component, glossy acrylic polyurethane coating for use onto structural steel in severely corrosive environments.
This product is now discontinued. See Sherwin Williams Zinc Clad IV EU as a potential alternative.
A high solids 2 pack epoxy, pigmented with MIO (Micaceous Iron Oxide) certified under Highways Agency No112.
A two component epoxy coating for carbon and shop primed steel and coated surfaces. Can be applied at sub zero surface temperatures.
A corrosion, abrasion, chemical and water resistant coating, suitable for interior and exterior use.
Two component polyamide-adduct epoxy paint providing a protective coating to steel & metal surfaces in severely corrosive environments.
A high solids, tin free, PU with fast drying and high gloss attributes for use where long term exterior gloss and colour retention is required.
A hard wearing top coat for use in aggressive atmospheric exposure. Network Rail approved. Highways Approved Item No 168