Full Product Catalogue

A 2 part, moisture curing, waterborne, low zinc silicate, prefabrication primer suitable for immediate application on shot blasted steel plates.

A two-component, tough and abrasion resistant aliphatic clear acrylic polyurethane gloss finish.

A two component, high build, amine adduct cured, phenolic epoxy holding primer.

Formerly Amercoat 160 HF. A one component zinc rich epoxy primer.

Low temperature curing protection of structural steel. Formerly SigmaZinc 170 and SigmaZinc 9.

A two component polyamide cured waterborne epoxy primer which is particularly suitable when solvents are not permitted, for health and safety reasons....

A heat resistant modified alkyd product that produces an aluminium finish, ideal for use on a variety of metal substrates exposed to a high level of h...

Formally Amercoat 891. Heat resistant silicone/acrylic finish - heat resistant up to 350°C.

A two component moisture curing, low zinc, silicate prefabrication primer, suitable for application on shot blasted steel plates.

Moisture and surface tolerant coating with adhesive and non-skid properties and is suitable for concrete, steel and damp surfaces.

A fast drying anti slip floor coating that can be applied in low temperatures down to freezing.

Sigma AquaCover 400 two component polyamine cured water borne epoxy coating for steel and concrete.

Formally Amercoat 385 PA. A high build poly amide cured zinc phosphate epoxy primer.

A two component, polyamide cured, epoxy primer that can be used as a general purpose epoxy primer, ideal for use on steel and non ferrous metals.

A high build polyamide cured recoatable epoxy coating.

A two component epoxy for use as a primer or coating for steel and concrete structures. Highways Approved Item No. 116

A two component high solids aluminium pigmented polyamine cured modified epoxy primer. Highways Item 115.

A 2 pack high build semigloss aliphatic acrylic polyurethane finish, Highways Approved Item No.169.

A two component high solids polymeric urethane paint that can be used to provide excellent protection even in strong atmospheric conditions.

For steel from PPG Sigma, Ameron. Highways Approved Item No.185.

A high build semi gloss coating, based on modified alkyd resin.

A high build polyamide cured zinc phosphate epoxy primer a general purpose epoxy primer/coating for atmospheric conditions.

A two component reinforced high solids polyamine adduct cured epoxy tank coating.

WRAS Approved for drinking water. A two component solvent free amine cured epoxy coating.

A two component amine adduct cured phenolic epoxy finish designed to provide a finish coat as part of a coating system used for the protection of subs...

A general purpose gloss paint based on a modified alkyd resin that can be applied over most intact alkyd paints.

A two component high solids glassflake reinforced polyamine adduct epoxy coating Highways Approved Item No.123

Offers long term protection in areas subject to wear and tear and can be applied in temperatures down to 10°C.