Full Product Catalogue

A single pack, shop applied, quick drying, acrylic modified, anti corrosive protective gloss finish for use on internal and external structural steel....

A conventional quick drying undercoat / tiecoat developed for marine use on above waterline areas.

A winterfast hi build undercoat formulated for low temperature curing down to 0°C.

A decorative sheen top coat designed for internal environments over Sherwin Williams intumescent primers.

A highly durable, silicone alkyd high gloss finish designed for external marine superstructures.

A 2 pack epoxy undercoat, pigmented with MIO (micaceous iron oxide). Network Rail Item No. 7.2.2 and 7.1.7.

A high build, 2 pack epoxy, zinc phosphate primer / build coat for the anti corrosive protection of carbon steel surfaces. LUL, M24, N20, M20, approve...

A 2 pack epoxy zinc phosphate primer suitable for the anti corrosive protection of carbon steel surfaces.

A high build, 2 pack modfied epoxy barrier primer that is hard wearing against abrasion with excellent resistance to immersion in salt and fresh water...

Used as a temporary protective coating for steel surfaces prepared by abrasive blast cleaning.

A heat resisting, matt, air drying silicone resin based coating for steel surfaces.

A water based, 2 pack epoxy gloss finish for hygienic interior use on walls, floors and ceilings.

A water based, quick drying gloss acrylic finish or sealercoat for Sherwin Williams FX Firetex intumescent product range.

A high performance fast drying acrylic urethane semi-gloss finish for use where long term exterior colour retention is required. Highways Agency Item ...

A hard wearing, anti slip extra heavy duty deck coating system. Reaches NORSOK M-501 and BS.476 Part 7: Surface spread of flames

A quick drying alkyd anti corrosive primer pigmented with zinc phosphate for the protection of steel.

A 3 pack epoxy high build anti slip deck coating, approved for MoD. UK MoD/DRA (Ministry of Defence) to DEF STAN 80 -134.

A solvent based, specially formulated product to use alongside compatible Sherwin Williams products.

Mordant wash solution formulated to give galvanised surfaces a chemical pre treatment. Highways Item No.155.

An epoxy MIO surface tolerant epoxy protective system suitable for low temperature curing.

A 2 pack zinc phosphate epoxy wet blast primer for application to surfaces which have been prepared by wet abrasive blasting.

A zinc phosphate pigmented 2 pack epoxy, temporary protective primer for steel surfaces. Highways Agency Item No.110

A rapid return to service, high build, edge retentive tank lining for prepared steel or concrete surfaces industrial and marine exposures.

An ultra high solids epoxy novolac amine engineered specifically for immersion service in storage tanks.

A high solids, tin free, PU with fast drying and high gloss attributes for use where long term exterior gloss and colour retention is required.

Suitable for use in a range of markets where durable performance and aesthetics are needed.

A direct to metal user friendly rapid curing epoxy.