£9.95 delivery on orders excluding certain products & postcodes *
A 2 pack epoxy pheonlic coating for the internal coating of storage tanks and vessels.
A high build, 2 pack epoxy, zinc phosphate primer / buildcoat for the anti corrosive protection of steel.
A versatile high performance polyamide cured epoxy designed to fulfil the needs of both new construction and maintenance painting to steel, aluminium ...
A high build 2-pack polyamide cured epoxy zinc phosphate primer finish for use as an internal flow coating for pipelines.
A self curing solvent based zinc silicate coating for the protection of blast cleaned steel surfaces up to 400°C.
A two pack isocyanate free finish based on an acrylic epoxy binder system. NORSOK M501 Rev 6 System 1.
An M24 spec low temperature curing, surface and humidity tolerant two pack modified epoxy anti corrosive coating for long life steel protection.
A high solids 2 pack epoxy, pigmented with MIO (Micaceous Iron Oxide) certified under Highways Agency No112.
A 2 pack epoxy zinc rich anti corrosive primer for the protection of blast cleaned steel.
An 2 pack epoxy zinc rich anti corrosive primer for the protection of steel surfaces.
A two pack, solvent free, thick film epoxy exterior intumescent coating that provides passive hydrocarbon fire protection for up to 4 hours on structu...
A flake filled MIO amine cured epoxy phenolic novolac formulated for use under thermal insulation at elevated or cryogenic temperatures.
An exterior scrim free intumescent coating for up to 120 minutes fire protection.
A two pack blast primer for Sherwin Williams Firetex intumescent coatings.
A high solids, 2 pack epoxy brushing and spraying mastic, pigmented with micronised glass flake, aluminium and anti corrosives.
A 2-pack epoxy sealercoat for use over zinc rich primers or as a blast primer over stainless steel.
A high build aluminium epoxy maintenance primer for abraded surfaces. Highways Agency Item No.115
A two pack epoxy, zinc free prefabrication primer formulated as a temporary protective coating for steel surfaces prepared by abrasive blast cleaning....
A durable 2 pack epoxy high build gloss finish for interior or exterior use, suitable for concrete floors.
A high performance, fast drying, acrylic urethane exterior gloss with good colour retention. N9, M24, M34 and Item No.168. approved.
A high performance fast drying acrylic urethane sheen finish for use where long term exterior colour retention characteristics are required.
A high build, 2 pack epoxy, zinc phosphate primer buildcoat for the anti corrosive protection of carbon steel surfaces.
A high solids, 2 pack epoxy containing micronised glass flake and anti corrosive pigments suitable for use on blast cleaned and cathodically protected...
Transgard TG116 two pack epoxy undercoat for abraded surfaces. Highways Item 116.
A high performance 2 pack single coat shop applied protective finish for structural steel that will not normally require further site coats.
A high solids 2 pack epoxy, pigmented with glass flakes and anti corrosives for use on steel. Network Rail Item 7.2.3. Highways Agency Item No.123
A multi functional epoxy coating suitable for the protection of steelwork in a range of exposure environments from C1 to C5.
A 2 pack epoxy undercoat, pigmented with MIO (micaceous iron oxide). Network Rail Item No. 7.2.2 and 7.1.7.