£9.95 delivery on orders excluding certain products & postcodes *
A 2 pack epoxy pheonlic coating for the internal coating of storage tanks and vessels.
A two-pack epoxy paint coating that is reinforced with glass flake. Highways Approved Item No.123.
A two component fast drying coating. Can be applied on steel, aluminium and concrete at sub zero surface temperatures.
A two component fast drying coating. Can be applied on steel, aluminium and concrete at sub zero surface temperatures.
A self-primed, surface tolerant coating with low temperature curing properties, low VOC and high film build.
A protective enamel coating for structures found in severe atmospheric conditions and is Network Rail approved.
A concrete repair for uneven, damaged or worn out concrete and power floated floors. Can be applied from 3mm to 15mm thick.
A colourless, water based, abrasion and solvent resistant anti-grafitti varnish.
A solvent based 2 pack PU applied without a primer to glass splash backs, plant, agricultural equipment, plastics etc.
Provide a very high gloss finish and excellent protection for steel in highly aggressive environments, up to C5M-low rated.
A 2 pack Polyurethane Matt Topcoat offering good resistance to harsh atmospheric conditions and chemical attack.
A 2 pack polyurethane topcoat is formulated with enamel and will provide a high opacity, high gloss finish.
A 2 pack epoxy vinyl primer that can be applied in a wet on wet paint system with a minimum of 2 hours between coats.
A water based polyurethane coating which can be applied direct to suitably prepared steel.
A water based polyurethane coating which can be applied direct to suitably prepared steel.
Anti corrosion system designed to withstand severe conditions and high temperatures up to 600° C.
A high spec, 2 pack, anti corrosion intermediate MIO coat for steel structures at risk from severe abrasion.
A two-component, polyamide adduct cured epoxy paint with good wetting properties and low water permeability.
A high build, 2 pack epoxy, zinc phosphate primer / buildcoat for the anti corrosive protection of steel.
A versatile high performance polyamide cured epoxy designed to fulfil the needs of both new construction and maintenance painting to steel, aluminium ...
A high build 2-pack polyamide cured epoxy zinc phosphate primer finish for use as an internal flow coating for pipelines.
A self curing solvent based zinc silicate coating for the protection of blast cleaned steel surfaces up to 400°C.
A two pack isocyanate free finish based on an acrylic epoxy binder system. NORSOK M501 Rev 6 System 1.
A high solids 2 pack epoxy, pigmented with MIO (Micaceous Iron Oxide) certified under Highways Agency No112.
A 2 pack epoxy zinc rich anti corrosive primer for the protection of blast cleaned steel.
An 2 pack epoxy zinc rich anti corrosive primer for the protection of steel surfaces.
A fast drying, anti corrosive, high solids 2 part polyamide cured zinc rich epoxy coating.
A 2 part, low yellowing, polyurethane finishing compound formulated to form a transparent, wear-resistant protective finishing coat on Mapei epoxy pro...