NORSOK Approved Paints

Home
Marine Paints / Cleaners
NORSOK Approved Paints

Download the manufacturer specifications for NORSOK M-501 certified systems below:

PPG SigmaTherm 230 Phenolic Epoxy
A two component high build heat resistant phenolic epoxy coating designed for use under insulation systems to provide heat protection of up to 230°...

From £499.87 £416.56
Sherwin Williams Macropoxy M922 - Formerly Transgard TG123 Epigrip
A high solids, 2 pack epoxy containing micronised glass flake and anti corrosive pigments suitable for use on blast cleaned and cathodically protected...

From £175.52 £146.27
Sherwin Williams Macropoxy K267 MIO - Formerly Leighs Transgard TG121 Macropoxy 1210
Transgard TG121/Epigrip K267 two pack epoxy high solids Micaceous Iron Oxide (MIO) Highway Agency Item No.121. N9/038 Protective system reference

From £118.08 £98.40
Sherwin Williams Macropoxy C123 - Formerly Leighs Epigrip C123
A high solids 2 pack epoxy, pigmented with glass flakes and anti corrosives for use on steel. Network Rail Item 7.2.3. Highways Agency Item No.123

From £134.86 £112.38
Sherwin Williams Macropoxy 400 - Formerly Leighs Epigrip C400V3
A multi functional epoxy coating suitable for the protection of steelwork in a range of exposure environments from C1 to C5.

From £138.97 £115.81
Hempel Hempathane HS 55610
A 2-part, polyurethane topcoat, with good gloss and colour retention. BBA Cert No. 08/H135-PS13. Highways Approved Item No.169.

From £76.32 £63.60
Hempel Hempadur 35560 - WRAS Approved
Approved potable water, solvent-free, high-build, polyamine adduct cured epoxy paint.

From £387.55 £322.96
Sherwin Williams Macropoxy L425 - Formerly Leighs Epigrip
A 2 pack epoxy zinc phosphate primer suitable for the anti corrosive protection of carbon steel surfaces.

From £158.24 £131.87
Sherwin Williams Macropoxy L574 - Formerly Leighs Metagard
Used as a temporary protective coating for steel surfaces prepared by abrasive blast cleaning.

From £110.02 £91.68
Sherwin Williams Sher-Cryl M770 - Formerly Leighs Envirogard
A water based, quick drying gloss acrylic finish or sealercoat for Sherwin Williams FX Firetex intumescent product range.

From £149.52 £124.60
Jotun Jotamastic 87 Aluminium
A two component surface tolerant, long lasting corrosion protection for carbon steel and aged coatings found in severe environments.

From £83.80 £69.83
Jotun Tankguard DW
A two component solvent free amine cured epoxy coating. It is specially designed for potable drinking water tanks.

From £384.76 £320.63
Jotun Hardtop CA
A two pack acrylic isocyanate free topcoat with good gloss retention. Highways Approved Item No.168.

From £136.88 £114.07
Jotun Hardtop Optima
A two-pack polysiloxane topcoat with excellent gloss and colour retention. Network Rail/Railtrack approved. Highways Approved Item No. 185.

From £219.11 £182.59
Jotun Hardtop AX
A two component chemically curing high gloss aliphatic acrylic polyurethane coating that offers resistance to UV degradation and good chemical resista...

From £134.34 £111.95
PPG SigmaFast 278
A 2 component high solids rapid drying zinc phosphate epoxy Primer and build coat that has been formulated to cure at low temperatures down to -5°...

From £73.06 £60.88
*Jotun Marathon
This product is now discontinued. See Jotun Marathon 550 as a potential alternative.

In stock
Jotun Jotamastic 87 GF
A two component protective coating for use in high traffic, atmospheric and immersed environments.

From £314.28 £261.90
Jotun Jotamastic 87 Aluminium WG
Low temperature curing, two component coating, providing protection in atmospheric and immersed environments.

From £83.80 £69.83
PPG NovaGuard 840
A two component, solvent free, amine cured, phenolic epoxy coating, designed for providing a one coating solution to tank exteriors.

From £494.50 £412.08
PPG SigmaPrime 200
A two component multipurpose polyamide anti-corrosive epoxy paint system from PPG.

From £270.48 £225.40
PPG SigmaPrime 700
A two component multi purpose polyamide cured anti-corrosive epoxy paint system from PPG.

From £320.64 £267.20
Sherwin Williams Epidek M153 - Formerly Leighs
A hard wearing, anti slip extra heavy duty deck coating system. Reaches NORSOK M-501 and BS.476 Part 7: Surface spread of flames

From £344.96 £287.47
Sherwin Williams Epidek M339 - Formerly Leighs
A 3 pack epoxy high build anti slip deck coating, approved for MoD. UK MoD/DRA (Ministry of Defence) to DEF STAN 80 -134.

From £283.94 £236.62
Jotun Tankguard SF
A two component solvent free amine cured phenolic/novolac epoxy coating. Specially designed tank lining with very good chemical resistance.

From £521.92 £434.93
Hempel Hempadur 4774D
A self-priming, two-component, high-build, pure epoxy paint.

From £287.09 £239.24
PPG SigmaGuard 750
A two component, moisture curing, zinc rich silicate coating used as a tank coating to provide excellent solvent and chemical resistance.

From £572.48 £477.07
PPG SigmaCover 522
A two component micaceous iron oxide pigmented polyamide cured epoxy primer/sealer/coating.

From £333.41 £277.84

System 1 (pre-qualified)	Carbon steel with maximum operating temperature < 120°C (248°F) Structural steel Exteriors of equipment, vessels, piping and valves (not insulated)
System 2	Carbon steel surfaces exposed to operating temperatures > 120°C (248°F)
System 3A-3G (System 3B pre-qualified)	Internal surface of carbon steel tanks
System 4 (pre-qualified)	Walkways, escape routes and lay down areas
System 5A (pre-qualified)	Epoxy-based fire protection
System 5B (pre-qualified)	Cement-based fire protection
System 6A	Uninsulated stainless steel when painting is required. Aluminum when painting is required
System 6B	Hot-dipped, galvanized steel when painting is required
System 6C	Insulated stainless steel piping and vessels at temperatures < 150°C (302°F)
System 7A (pre-qualified)	Carbon and stainless steel in the splash zone
System 7B (pre-qualified)	Submerged carbon and stainless steel ≤ 50°C (122°F)
System 7C (pre-qualified)	Submerged carbon and stainless steel > 50°C (122°F)
System 8a	Structural carbon steel with maximum operating temperature ≤ 80°C (176°F) in internal and fully dry and ventilated areas
System 8b	Structural carbon steel with maximum operating temperature ≤ 80°C (176°F) in fully dry and ventilated areas
System 9	Bulk-supplied carbon steel valves with maximum operating temperature up to 150°C (302°F)