£9.95 delivery on orders excluding certain products & postcodes *
Protective systems for existing structures using epoxy glassflake – polyurethane topcoat.
Download the manufacturer specifications for Network Rail certified systems below:
Hempel | International Paints | Jotun | PPG | Sherwin Williams
A two-pack epoxy paint coating that is reinforced with glass flake. Highways Approved Item No.123.
A protective enamel coating for structures found in severe atmospheric conditions and is Network Rail approved.
A two component epoxy which provides a protective coating to newly constructed, metal substrates, within atmospheric environments.
A corrosion, abrasion, chemical and water resistant coating, suitable for interior and exterior use.
A two component amine cured epoxy coating designed for new construction where short dry to handle and over coating times are required.
A two pack epoxy zinc phosphate primer, primarily formulated to meet the requirements of the UK Highways Agency specification.
A two component, high build, acrylic polyurethane finish giving excellent durability and long term recoatability.
For use on a wide variety of substrates including hand prepared rusty steel.
A flexible coating with good abrasion and impact resistance. BBA Cert No. 08/H135-PS5. Highways Approved Item No.110
A high performance, fast drying, acrylic urethane exterior gloss with good colour retention. N9, M24, M34 and Item No.168. approved.
A high solids, 2 pack epoxy containing micronised glass flake and anti corrosive pigments suitable for use on blast cleaned and cathodically protected...
A high solids 2 pack epoxy, pigmented with glass flakes and anti corrosives for use on steel. Network Rail Item 7.2.3. Highways Agency Item No.123
A self-priming epoxy with good impact and abrasion resistance. BBA Cert. no. 08/H135-PS1. Highways Approved Item No.123.
A 2-part, polyurethane topcoat, with good gloss and colour retention. BBA Cert No. 08/H135-PS13. Highways Approved Item No.169.
Used as a temporary protective coating for steel surfaces prepared by abrasive blast cleaning.
A fast drying, two part amine cured epoxy zinc phosphate pigmented, high solids, high build product formulated for exposed structural steel.
A two pack acrylic isocyanate free topcoat with good gloss retention. Highways Approved Item No.168.
A hard wearing top coat for use in aggressive atmospheric exposure. Network Rail/Railtrack approved. Highways Approved Item No.169.
A two-pack polysiloxane topcoat with excellent gloss and colour retention. Network Rail/Railtrack approved. Highways Approved Item No. 185.
An industry approved topcoat for metal and coated surfaces subject to highly atmospheric environments.
A two component protective coating for use in high traffic, atmospheric and immersed environments.
An epoxy MIO surface tolerant epoxy protective system suitable for low temperature curing.
A two component topcoat for the protection of structural steel in severely corrosive atmospheric environments.
A two component acrylic polyurethane finish giving excellent durability and long term recoatability.
A tough, hard wearing finish coat for application over properly primed surfaces.