Full Product Catalogue

Provides a tough and durable floor protection finish, that will cure down to low temperatures.

A solvent based, specially formulated product to use alongside compatible Sherwin Williams products.

A multi-functional low temperature curing phenalkylated zinc phosphate coating for the protection of carbon steel.

A glass flake vinyl ester acrylic co-polymer that is approved to NORSOK Rev 6 System 7A and 7B.

A water based degreasing agent based on a blend of plant derived surfactants free from caustic alkalis, silicates, harmful solvents, phosphates or agg...

A two pack blast primer for Sherwin Williams Firetex intumescent coatings.

A 2-pack epoxy sealercoat for use over zinc rich primers or as a blast primer over stainless steel.

A high build aluminium epoxy maintenance primer for abraded surfaces. Highways Agency Item No.115

This product is now discontinued. See Sherwin Williams Kem-Kromik 671 as a potential alternative.

A durable 2 pack epoxy high build gloss finish for interior or exterior use, suitable for concrete floors.

A high build, 2 pack epoxy, zinc phosphate primer buildcoat for the anti corrosive protection of carbon steel surfaces.

Transgard TG116 two pack epoxy undercoat for abraded surfaces. Highways Item 116.

A high solids 2 pack epoxy, pigmented with glass flakes and anti corrosives for use on steel. Network Rail Item 7.2.3. Highways Agency Item No.123

A multi functional epoxy coating suitable for the protection of steelwork in a range of exposure environments from C1 to C5.

A single pack, high quality alkyd gloss finish for interior and exterior equipment and structural steelwork.

A conventional quick drying undercoat / tiecoat developed for marine use on above waterline areas.

A winterfast hi build undercoat formulated for low temperature curing down to 0°C.

A decorative sheen top coat designed for internal environments over Sherwin Williams intumescent primers.

A highly durable, silicone alkyd high gloss finish designed for external marine superstructures.

A 2 pack epoxy undercoat, pigmented with MIO (micaceous iron oxide). Network Rail Item No. 7.2.2 and 7.1.7.

A 2 pack epoxy zinc phosphate primer suitable for the anti corrosive protection of carbon steel surfaces.

A high build, 2 pack modfied epoxy barrier primer that is hard wearing against abrasion with excellent resistance to immersion in salt and fresh water...

Used as a temporary protective coating for steel surfaces prepared by abrasive blast cleaning.

A heat resisting, matt, air drying silicone resin based coating for steel surfaces.

A water based, 2 pack epoxy gloss finish for hygienic interior use on walls, floors and ceilings.

A water based, quick drying gloss acrylic finish or sealercoat for Sherwin Williams FX Firetex intumescent product range.

A quick drying alkyd anti corrosive primer pigmented with zinc phosphate for the protection of steel.

A 3 pack epoxy high build anti slip deck coating, approved for MoD. UK MoD/DRA (Ministry of Defence) to DEF STAN 80 -134.