Full Product Catalogue

A two pack epoxy, zinc free prefabrication primer formulated as a temporary protective coating for steel surfaces prepared by abrasive blast cleaning....

A durable 2 pack epoxy high build gloss finish for interior or exterior use, suitable for concrete floors.

A high performance, fast drying, acrylic urethane exterior gloss with good colour retention. N9, M24, M34 and Item No.168. approved.

A high performance fast drying acrylic urethane sheen finish for use where long term exterior colour retention characteristics are required.

A high build, 2 pack epoxy, zinc phosphate primer buildcoat for the anti corrosive protection of carbon steel surfaces.

A high solids, 2 pack epoxy containing micronised glass flake and anti corrosive pigments suitable for use on blast cleaned and cathodically protected...

Transgard TG121/Epigrip K267 two pack epoxy high solids Micaceous Iron Oxide (MIO) Highway Agency Item No.121. N9/038 Protective system reference

Transgard TG116 two pack epoxy undercoat for abraded surfaces. Highways Item 116.

A high performance 2 pack single coat shop applied protective finish for structural steel that will not normally require further site coats.

A high solids 2 pack epoxy, pigmented with glass flakes and anti corrosives for use on steel. Network Rail Item 7.2.3. Highways Agency Item No.123

A multi functional epoxy coating suitable for the protection of steelwork in a range of exposure environments from C1 to C5.

A single pack, high quality alkyd gloss finish for interior and exterior equipment and structural steelwork.

A single pack, shop applied, quick drying, acrylic modified, anti corrosive protective gloss finish for use on internal and external structural steel....

A conventional quick drying undercoat / tiecoat developed for marine use on above waterline areas.

A winterfast hi build undercoat formulated for low temperature curing down to 0°C.

A decorative sheen top coat designed for internal environments over Sherwin Williams intumescent primers.

A highly durable, silicone alkyd high gloss finish designed for external marine superstructures.

A 2 pack epoxy undercoat, pigmented with MIO (micaceous iron oxide). Network Rail Item No. 7.2.2 and 7.1.7.

A high build, 2 pack epoxy, zinc phosphate primer / build coat for the anti corrosive protection of carbon steel surfaces. LUL, M24, N20, M20, approve...

A 2 pack epoxy zinc phosphate primer suitable for the anti corrosive protection of carbon steel surfaces.

A high build, 2 pack modfied epoxy barrier primer that is hard wearing against abrasion with excellent resistance to immersion in salt and fresh water...

Used as a temporary protective coating for steel surfaces prepared by abrasive blast cleaning.

A heat resisting, matt, air drying silicone resin based coating for steel surfaces.

A water based, 2 pack epoxy gloss finish for hygienic interior use on walls, floors and ceilings.

A water based, quick drying gloss acrylic finish or sealercoat for Sherwin Williams FX Firetex intumescent product range.

A high performance fast drying acrylic urethane semi-gloss finish for use where long term exterior colour retention is required. Highways Agency Item ...

A hard wearing, anti slip extra heavy duty deck coating system. Reaches NORSOK M-501 and BS.476 Part 7: Surface spread of flames

A quick drying alkyd anti corrosive primer pigmented with zinc phosphate for the protection of steel.