£9.95 delivery on orders excluding certain products & postcodes *
For garage, warehouses floors, concrete, tiles, ferrous steel, stainless steel, timber and galvanised steel.
A fast drying product, based on solvent-based epoxy resins that contains rust inhibitive pigments to protect all metal surfaces.
A fast drying anti slip floor coating that can be applied in low temperatures down to freezing.
An industry approved topcoat for metal and coated surfaces subject to highly atmospheric environments.
A two-pack epoxy paint coating that is reinforced with glass flake. Highways Approved Item No.123.
A two component fast drying coating. Can be applied on steel, aluminium and concrete at sub zero surface temperatures.
A protective enamel coating for structures found in severe atmospheric conditions and is Network Rail approved.
A solvent based 2 pack PU applied without a primer to glass splash backs, plant, agricultural equipment, plastics etc.
A water based polyurethane coating which can be applied direct to suitably prepared steel.
A water based polyurethane coating which can be applied direct to suitably prepared steel.
This Primer has good resistance to water, solvents and abrasion and is ideal for protecting ferrous steel in aggressive environments.
A high spec, 2 pack, anti corrosion intermediate MIO coat for steel structures at risk from severe abrasion.
A 2 part polyamine cured epoxy coating with good chemical resistance formulated for use as a primer, mid coat or finish coat.
A two component epoxy coating for carbon and shop primed steel and coated surfaces. Can be applied at sub zero surface temperatures.
A two component epoxy which provides a protective coating to newly constructed, metal substrates, within atmospheric environments.
A 2 pack high build anti-corrosive epoxy mastic which can be applied in high film thicknesses for smaller maintenance and repair jobs.
A corrosion, abrasion, chemical and water resistant coating, suitable for interior and exterior use.
A two part polyamide cured, high molecular weight epoxy coating, designed as a high build, all purpose coating for new construction.
A corrosion, abrasion, chemical and water resistant coating, suitable for interior and exterior use.
A two component polyamine cured epoxy mastic coating that is a surface tolerant, abrasion resistance, high solids, high build product.
A two component polyamide cured vinyl epoxy based coating that is specially designed as a tie coat between epoxy primers and anti-fouling systems.
A two component water borne epoxy coating for corrosion protection. Designed for where short dry to handle and over coating times are required.
A two component, polyamide cured, high molecular weight epoxy coating designed as a primer for new construction.
Formulated as a primer, finish coat or as single coat system in atmospheric environments or as a final coat in immersed environment.
Specially designed as a universal, all round, new construction coating. Can be used as primer, mid coat, finish coat or as single coat system.
A two component, low VOC, high solids, fast drying polyaspartic high gloss primer / finish coating.
A two-component epoxy paint, that cures to a flexible, well adhering coating with good abrasion and impact resistance.
A two-component, high-gloss acrylic polyurethane enamel cured with aliphatic isocyanate, with good gloss and colour retention.