Full Product Catalogue

A 2 pack epoxy pheonlic coating for the internal coating of storage tanks and vessels.

A high build, 2 pack epoxy, zinc phosphate primer / buildcoat for the anti corrosive protection of steel.

A versatile high performance polyamide cured epoxy designed to fulfil the needs of both new construction and maintenance painting to steel, aluminium ...

A high build 2-pack polyamide cured epoxy zinc phosphate primer finish for use as an internal flow coating for pipelines.

A self curing solvent based zinc silicate coating for the protection of blast cleaned steel surfaces up to 400°C.

A two pack isocyanate free finish based on an acrylic epoxy binder system. NORSOK M501 Rev 6 System 1.

A high solids 2 pack epoxy, pigmented with MIO (Micaceous Iron Oxide) certified under Highways Agency No112.

A 2 pack epoxy zinc rich anti corrosive primer for the protection of blast cleaned steel.

An 2 pack epoxy zinc rich anti corrosive primer for the protection of steel surfaces.

An exterior scrim free intumescent coating for up to 120 minutes fire protection.

A two pack blast primer for Sherwin Williams Firetex intumescent coatings.

A 2-pack epoxy sealercoat for use over zinc rich primers or as a blast primer over stainless steel.

A high build aluminium epoxy maintenance primer for abraded surfaces. Highways Agency Item No.115

A durable 2 pack epoxy high build gloss finish for interior or exterior use, suitable for concrete floors.

A high build, 2 pack epoxy, zinc phosphate primer buildcoat for the anti corrosive protection of carbon steel surfaces.

Transgard TG116 two pack epoxy undercoat for abraded surfaces. Highways Item 116.

A high solids 2 pack epoxy, pigmented with glass flakes and anti corrosives for use on steel. Network Rail Item 7.2.3. Highways Agency Item No.123

A multi functional epoxy coating suitable for the protection of steelwork in a range of exposure environments from C1 to C5.

A 2 pack epoxy undercoat, pigmented with MIO (micaceous iron oxide). Network Rail Item No. 7.2.2 and 7.1.7.

A 2 pack epoxy zinc phosphate primer suitable for the anti corrosive protection of carbon steel surfaces.

A high build, 2 pack modfied epoxy barrier primer that is hard wearing against abrasion with excellent resistance to immersion in salt and fresh water...

Used as a temporary protective coating for steel surfaces prepared by abrasive blast cleaning.

A water based, 2 pack epoxy gloss finish for hygienic interior use on walls, floors and ceilings.

An epoxy MIO surface tolerant epoxy protective system suitable for low temperature curing.

A 2 pack zinc phosphate epoxy wet blast primer for application to surfaces which have been prepared by wet abrasive blasting.

A zinc phosphate pigmented 2 pack epoxy, temporary protective primer for steel surfaces. Highways Agency Item No.110

A rapid return to service, high build, edge retentive tank lining for prepared steel or concrete surfaces industrial and marine exposures.

An ultra high solids epoxy novolac amine engineered specifically for immersion service in storage tanks.