£7.75 delivery on orders excluding certain products & postcodes *
A two pack epoxy, zinc free prefabrication primer formulated as a temporary protective coating for steel surfaces prepared by abrasive blast cleaning....
A durable 2 pack epoxy high build gloss finish for interior or exterior use, suitable for concrete floors.
A high performance, fast drying, acrylic urethane exterior gloss with good colour retention. N9, M24, M34 and Item No.168. approved.
A high performance fast drying acrylic urethane sheen finish for use where long term exterior colour retention characteristics are required.
A high build, 2 pack epoxy, zinc phosphate primer buildcoat for the anti corrosive protection of carbon steel surfaces.
A high solids, 2 pack epoxy containing micronised glass flake and anti corrosive pigments suitable for use on blast cleaned and cathodically protected...
Transgard TG116 two pack epoxy undercoat for abraded surfaces. Highways Item 116.
A high performance 2 pack single coat shop applied protective finish for structural steel that will not normally require further site coats.
A high solids 2 pack epoxy, pigmented with glass flakes and anti corrosives for use on steel. Network Rail Item 7.2.3. Highways Agency Item No.123
A multi functional epoxy coating suitable for the protection of steelwork in a range of exposure environments from C1 to C5.
A 2 pack epoxy undercoat, pigmented with MIO (micaceous iron oxide). Network Rail Item No. 7.2.2 and 7.1.7.
A high build, 2 pack epoxy, zinc phosphate primer / build coat for the anti corrosive protection of carbon steel surfaces. LUL, M24, N20, M20, approve...
A 2 pack epoxy zinc phosphate primer suitable for the anti corrosive protection of carbon steel surfaces.
A high build, 2 pack modfied epoxy barrier primer that is hard wearing against abrasion with excellent resistance to immersion in salt and fresh water...
Used as a temporary protective coating for steel surfaces prepared by abrasive blast cleaning.
A water based, 2 pack epoxy gloss finish for hygienic interior use on walls, floors and ceilings.
A high performance fast drying acrylic urethane semi-gloss finish for use where long term exterior colour retention is required. Highways Agency Item ...
A high build aluminium epoxy maintenance primer for abraded surfaces. Highways Agency Item No.115
An epoxy MIO surface tolerant epoxy protective system suitable for low temperature curing.
A 2 pack zinc phosphate epoxy wet blast primer for application to surfaces which have been prepared by wet abrasive blasting.
A zinc phosphate pigmented 2 pack epoxy, temporary protective primer for steel surfaces. Highways Agency Item No.110
A rapid return to service, high build, edge retentive tank lining for prepared steel or concrete surfaces industrial and marine exposures.
An ultra high solids epoxy novolac amine engineered specifically for immersion service in storage tanks.
A high solids, tin free, PU with fast drying and high gloss attributes for use where long term exterior gloss and colour retention is required.
A two pack blast primer for Sherwin Williams Firetex intumescent coatings.
A high solids, 2 pack epoxy brushing and spraying mastic, pigmented with micronised glass flake, aluminium and anti corrosives.
A 2-pack epoxy sealercoat for use over zinc rich primers or as a blast primer over stainless steel.
An exterior scrim free intumescent coating for up to 120 minutes fire protection.