£9.95 delivery on orders excluding certain products & postcodes *
A 2 pack epoxy pheonlic coating for the internal coating of storage tanks and vessels.
A two-pack epoxy paint coating that is reinforced with glass flake. Highways Approved Item No.123.
A two component fast drying coating. Can be applied on steel, aluminium and concrete at sub zero surface temperatures.
A two component fast drying coating. Can be applied on steel, aluminium and concrete at sub zero surface temperatures.
A self-primed, surface tolerant coating with low temperature curing properties, low VOC and high film build.
A protective enamel coating for structures found in severe atmospheric conditions and is Network Rail approved.
A concrete repair for uneven, damaged or worn out concrete and power floated floors. Can be applied from 3mm to 15mm thick.
A colourless, water based, abrasion and solvent resistant anti-grafitti varnish.
A solvent based 2 pack PU applied without a primer to glass splash backs, plant, agricultural equipment, plastics etc.
Provide a very high gloss finish and excellent protection for steel in highly aggressive environments, up to C5M-low rated.
A 2 pack Polyurethane Matt Topcoat offering good resistance to harsh atmospheric conditions and chemical attack.
A 2 pack polyurethane topcoat is formulated with enamel and will provide a high opacity, high gloss finish.
A 2 pack epoxy vinyl primer that can be applied in a wet on wet paint system with a minimum of 2 hours between coats.
A water based polyurethane coating which can be applied direct to suitably prepared steel.
A water based polyurethane coating which can be applied direct to suitably prepared steel.
A quality transparent multi-purpose water based scratch-resistant topcoat suitable for interior and exterior use.
A tough, hygienic coating that inhibits the growth of micro organisms such as bacteria and germs using silver ion technology.
Anti corrosion system designed to withstand severe conditions and high temperatures up to 600° C.
A high spec, 2 pack, anti corrosion intermediate MIO coat for steel structures at risk from severe abrasion.
A two-component, polyamide adduct cured epoxy paint with good wetting properties and low water permeability.
A high build, 2 pack epoxy, zinc phosphate primer / buildcoat for the anti corrosive protection of steel.
A versatile high performance polyamide cured epoxy designed to fulfil the needs of both new construction and maintenance painting to steel, aluminium ...
A high build 2-pack polyamide cured epoxy zinc phosphate primer finish for use as an internal flow coating for pipelines.
A self curing solvent based zinc silicate coating for the protection of blast cleaned steel surfaces up to 400°C.
A two pack isocyanate free finish based on an acrylic epoxy binder system. NORSOK M501 Rev 6 System 1.
A high solids 2 pack epoxy, pigmented with MIO (Micaceous Iron Oxide) certified under Highways Agency No112.
A 2 pack epoxy zinc rich anti corrosive primer for the protection of blast cleaned steel.