£9.95 delivery on orders excluding certain products & postcodes *
This product is now discontinued. See Sherwin Williams Macropoxy 400 as a potential alternative.
A self curing solvent based zinc silicate coating for the protection of blast cleaned steel surfaces up to 400°C.
A 2-pack epoxy sealercoat for use over zinc rich primers or as a blast primer over stainless steel.
A high build aluminium epoxy maintenance primer for abraded surfaces. Highways Agency Item No.115
Mordant wash solution formulated to give galvanised surfaces a chemical pre treatment. Highways Item No.155.
A zinc phosphate pigmented 2 pack epoxy, temporary protective primer for steel surfaces. Highways Agency Item No.110
An M24 spec low temperature curing, surface and humidity tolerant two pack modified epoxy anti corrosive coating for long life steel protection.
A high solids, 2 pack epoxy brushing and spraying mastic, with micronised glass flake, aluminium and anti corrosives.
A high performance, fast drying, acrylic urethane exterior gloss with good colour retention. N9, M24, M34 and Item No.168. approved.
A high performance fast drying acrylic urethane sheen finish for use where long term exterior colour retention characteristics are required.
Suitable for use in a range of markets where durable performance and aesthetics are needed.
A multi-functional low temperature curing phenalkylated zinc phosphate coating for the protection of carbon steel.
A quick drying alkyd anti corrosive primer pigmented with zinc phosphate for the protection of steel.
A single pack, shop applied, quick drying, acrylic modified, anti corrosive protective gloss finish for use on internal and external structural steel....
A single component anti-corrosive spraying or brushing primer for steel.
A single pack, high quality alkyd gloss finish for interior and exterior equipment and structural steelwork.
A conventional quick drying undercoat / tiecoat developed for marine use on above waterline areas.
A multi functional epoxy coating suitable for the protection of steelwork in a range of exposure environments from C1 to C5.
A high solids 2 pack epoxy, pigmented with glass flakes and anti corrosives for use on steel. Network Rail Item 7.2.3. Highways Agency Item No.123
A 2 pack epoxy undercoat, pigmented with MIO (micaceous iron oxide). Network Rail Item No. 7.2.2 and 7.1.7.
A high build, 2 pack, anti-corrosive, zinc phosphate primer / build coat. For carbon steel. LUL, M24, N20, M20 approved.
A high build, 2 pack epoxy, zinc phosphate primer / buildcoat for the anti corrosive protection of steel.
A 2 pack zinc free epoxy temporary protective coating for steel surfaces prepared by abrasive blast cleaning.
Transgard TG121/Epigrip K267 two pack epoxy high solids Micaceous Iron Oxide (MIO) Highway Agency Item No.121. N9/038 Protective system reference
A 2 pack epoxy zinc phosphate primer suitable for the anti corrosive protection of carbon steel surfaces.
A high build, 2 pack modfied epoxy barrier primer that is hard wearing against abrasion with excellent resistance to immersion in salt and fresh water...
Used as a temporary protective coating for steel surfaces prepared by abrasive blast cleaning.