£7.75 delivery on orders excluding certain products & postcodes *
A high solids, 2 pack epoxy brushing and spraying mastic, pigmented with micronised glass flake, aluminium and anti corrosives.
A 2-pack epoxy sealercoat for use over zinc rich primers or as a blast primer over stainless steel.
A high build aluminium epoxy maintenance primer for abraded surfaces. Highways Agency Item No.115
This product is now discontinued. See Sherwin Williams Macropoxy 400 as a potential alternative.
A self curing solvent based zinc silicate coating for the protection of blast cleaned steel surfaces up to 400°C.
An M24 spec low temperature curing, surface and humidity tolerant two pack modified epoxy anti corrosive coating for long life steel protection.
Mordant wash solution formulated to give galvanised surfaces a chemical pre treatment. Highways Item No.155.
A zinc phosphate pigmented 2 pack epoxy, temporary protective primer for steel surfaces. Highways Agency Item No.110
A high performance, fast drying, acrylic urethane exterior gloss with good colour retention. N9, M24, M34 and Item No.168. approved.
A high performance fast drying acrylic urethane sheen finish for use where long term exterior colour retention characteristics are required.
Suitable for use in a range of markets where durable performance and aesthetics are needed.
A multi-functional low temperature curing phenalkylated zinc phosphate coating for the protection of carbon steel.
A quick drying alkyd anti corrosive primer pigmented with zinc phosphate for the protection of steel.
A single pack, shop applied, quick drying, acrylic modified, anti corrosive protective gloss finish for use on internal and external structural steel....
A single component anti-corrosive spraying or brushing primer for steel.
A single pack, high quality alkyd gloss finish for interior and exterior equipment and structural steelwork.
A conventional quick drying undercoat / tiecoat developed for marine use on above waterline areas.
A multi functional epoxy coating suitable for the protection of steelwork in a range of exposure environments from C1 to C5.
A high solids 2 pack epoxy, pigmented with glass flakes and anti corrosives for use on steel. Network Rail Item 7.2.3. Highways Agency Item No.123
A 2 pack epoxy undercoat, pigmented with MIO (micaceous iron oxide). Network Rail Item No. 7.2.2 and 7.1.7.
A high build, 2 pack epoxy, zinc phosphate primer / build coat for the anti corrosive protection of carbon steel surfaces. LUL, M24, N20, M20, approve...
A high build, 2 pack epoxy, zinc phosphate primer / buildcoat for the anti corrosive protection of steel.
A two pack epoxy, zinc free prefabrication primer formulated as a temporary protective coating for steel surfaces prepared by abrasive blast cleaning....
Transgard TG121/Epigrip K267 two pack epoxy high solids Micaceous Iron Oxide (MIO) Highway Agency Item No.121. N9/038 Protective system reference
A 2 pack epoxy zinc phosphate primer suitable for the anti corrosive protection of carbon steel surfaces.
A high build, 2 pack modfied epoxy barrier primer that is hard wearing against abrasion with excellent resistance to immersion in salt and fresh water...
Used as a temporary protective coating for steel surfaces prepared by abrasive blast cleaning.