£7.75 delivery on orders excluding certain products & postcodes *
A high solids, 2 pack epoxy brushing and spraying mastic, pigmented with micronised glass flake, aluminium and anti corrosives.
A 2-pack epoxy sealercoat for use over zinc rich primers or as a blast primer over stainless steel.
A high build aluminium epoxy maintenance primer for abraded surfaces. Highways Agency Item No.115
A self curing solvent based zinc silicate coating for the protection of blast cleaned steel surfaces up to 400°C.
An M24 spec low temperature curing, surface and humidity tolerant two pack modified epoxy anti corrosive coating for long life steel protection.
A high performance, fast drying, acrylic urethane exterior gloss with good colour retention. N9, M24, M34 and Item No.168. approved.
A high performance fast drying acrylic urethane sheen finish for use where long term exterior colour retention characteristics are required.
Suitable for use in a range of markets where durable performance and aesthetics are needed.
A multi-functional low temperature curing phenalkylated zinc phosphate coating for the protection of carbon steel.
A single pack, shop applied, quick drying, acrylic modified, anti corrosive protective gloss finish for use on internal and external structural steel....
A single pack, high quality alkyd gloss finish for interior and exterior equipment and structural steelwork.
A multi functional epoxy coating suitable for the protection of steelwork in a range of exposure environments from C1 to C5.
A high solids 2 pack epoxy, pigmented with glass flakes and anti corrosives for use on steel. Network Rail Item 7.2.3. Highways Agency Item No.123
A 2 pack epoxy undercoat, pigmented with MIO (micaceous iron oxide). Network Rail Item No. 7.2.2 and 7.1.7.
A high build, 2 pack epoxy, zinc phosphate primer / build coat for the anti corrosive protection of carbon steel surfaces. LUL, M24, N20, M20, approve...
A high build, 2 pack epoxy, zinc phosphate primer / buildcoat for the anti corrosive protection of steel.
A two pack epoxy, zinc free prefabrication primer formulated as a temporary protective coating for steel surfaces prepared by abrasive blast cleaning....
Transgard TG121/Epigrip K267 two pack epoxy high solids Micaceous Iron Oxide (MIO) Highway Agency Item No.121. N9/038 Protective system reference
A 2 pack epoxy zinc phosphate primer suitable for the anti corrosive protection of carbon steel surfaces.
Used as a temporary protective coating for steel surfaces prepared by abrasive blast cleaning.
A 2 pack zinc phosphate epoxy wet blast primer for application to surfaces which have been prepared by wet abrasive blasting.
A durable 2 pack epoxy high build gloss finish for interior or exterior use, suitable for concrete floors.
An epoxy MIO surface tolerant epoxy protective system suitable for low temperature curing.
A high solids, 2 pack epoxy containing micronised glass flake and anti corrosive pigments suitable for use on blast cleaned and cathodically protected...
Transgard TG116 two pack epoxy undercoat for abraded surfaces. Highways Item 116.
An 2 pack epoxy zinc rich anti corrosive primer for the protection of steel surfaces.
A 2 pack epoxy zinc rich anti corrosive primer for the protection of blast cleaned steel.