£9.95 delivery on orders excluding certain products & postcodes *
Network Rail Approved Paint Systems for the long term corrosion protection of assets beyond 25 years.
Download the manufacturer specifications for Network Rail certified systems below:
Hempel | International Paints | Jotun | PPG | Sherwin Williams
A self-primed, surface tolerant coating with low temperature curing properties, low VOC and high film build.
A protective enamel coating for structures found in severe atmospheric conditions and is Network Rail approved.
An M24 spec low temperature curing, surface and humidity tolerant two pack modified epoxy anti corrosive coating for long life steel protection.
A two component epoxy coating for carbon and shop primed steel and coated surfaces. Can be applied at sub zero surface temperatures.
A two pack, high solids, high gloss topcoat for industrial use in offshore corrosive environments. Cures down to 0°C.
A two component, high build, acrylic polyurethane finish giving excellent durability and long term recoatability.
For use on a wide variety of substrates including hand prepared rusty steel.
A high performance, fast drying, acrylic urethane exterior gloss with good colour retention. N9, M24, M34 and Item No.168. approved.
A high performance fast drying acrylic urethane sheen finish for use where long term exterior colour retention characteristics are required.
A 2-part, polyurethane topcoat, with good gloss and colour retention. BBA Cert No. 08/H135-PS13. Highways Approved Item No.169.
A 2 pack epoxy undercoat, pigmented with MIO (micaceous iron oxide). Network Rail Item No. 7.2.2 and 7.1.7.
A high build, 2 pack epoxy, zinc phosphate primer / build coat for the anti corrosive protection of carbon steel surfaces. LUL, M24, N20, M20, approve...
A high end surface tolerant epoxy mastic coating for less severe exposures or when shorter maintenance intervals are expected in tougher environments....
A two component surface tolerant, long lasting corrosion protection for carbon steel and aged coatings found in severe environments.
A hard wearing top coat for use in aggressive atmospheric exposure. Network Rail/Railtrack approved. Highways Approved Item No.169.
An industry approved topcoat for metal and coated surfaces subject to highly atmospheric environments.
An epoxy MIO surface tolerant epoxy protective system suitable for low temperature curing.
A 2 pack structural steel and piping coating that will continue to cure while immersed.
A tough, hard wearing finish coat for application over properly primed surfaces.