£7.75 delivery on orders excluding certain products & postcodes *
A protective system for existing structures using epoxy – polyurethane topcoat.
Download the manufacturer specifications for Network Rail certified systems below:
Hempel | International Paints | Jotun | PPG | Sherwin Williams
A 2 pack high build semigloss aliphatic acrylic polyurethane finish, Highways Approved Item No.169.
A winterfast hi build undercoat formulated for low temperature curing down to 0°C.
A high end surface tolerant epoxy mastic coating for less severe exposures or when shorter maintenance intervals are expected in tougher environments....
A fast drying, two part amine cured epoxy zinc phosphate pigmented, high solids, high build product formulated for exposed structural steel.
A hard wearing top coat for use in aggressive atmospheric exposure. Network Rail/Railtrack approved. Highways Approved Item No.169.
An industry approved topcoat for metal and coated surfaces subject to highly atmospheric environments.
A 2-part, polyurethane topcoat, with good gloss and colour retention. BBA Cert No. 08/H135-PS13. Highways Approved Item No.169.
A two component acrylic polyurethane finish giving excellent durability and long term recoatability.
A two component, high build, acrylic polyurethane finish giving excellent durability and long term recoatability.
A two component, high solids, low VOC, epoxy zinc phosphate/micaceous iron oxide primer.
A two part, high solids, low VOC epoxy micaceous iron oxide intermediate coating.
For use on a wide variety of substrates including hand prepared rusty steel.
A flexible coating with good abrasion and impact resistance. BBA Cert No. 08/H135-PS5. Highways Approved Item No.110
A high solids 2 pack epoxy, pigmented with MIO (Micaceous Iron Oxide) certified under Highways Agency No112.
A two component epoxy coating for carbon and shop primed steel and coated surfaces. Can be applied at sub zero surface temperatures.
A two component topcoat for the protection of structural steel in severely corrosive atmospheric environments.
Two component polyamide-adduct epoxy paint providing a protective coating to steel & metal surfaces in severely corrosive environments.
A hard wearing top coat for use in aggressive atmospheric exposure. Network Rail approved. Highways Approved Item No 168
A two component fast drying coating. Can be applied on steel, aluminium and concrete at sub zero surface temperatures.
A two component fast drying coating. Can be applied on steel, aluminium and concrete at sub zero surface temperatures.
A self-primed, surface tolerant coating with low temperature curing properties, low VOC and high film build.
Formerly Amercoat 450E, Amercoat 450S. A two pack PU Gloss Finish for steel. Item No.168. M24(XM92).
A corrosion, abrasion, chemical and water resistant coating, suitable for interior and exterior use.