£7.75 delivery on orders excluding certain products & postcodes *
A protective system for existing structures using epoxy – polyurethane topcoat.
Download the manufacturer specifications for Network Rail certified systems below:
Hempel | International Paints | Jotun | PPG | Sherwin Williams
An epoxy MIO surface tolerant epoxy protective system suitable for low temperature curing.
A two component topcoat for the protection of structural steel in severely corrosive atmospheric environments.
Two component polyamide-adduct epoxy paint providing a protective coating to steel & metal surfaces in severely corrosive environments.
A hard wearing top coat for use in aggressive atmospheric exposure. Network Rail approved. Highways Approved Item No 168
Two component high solids, high build, polyamide cured epoxy coating designed for general purpose protection to steel and concrete structures.
A high performance, fast drying, acrylic urethane exterior gloss with good colour retention. N9, M24, M34 and Item No.168. approved.
A 2-part, polyurethane topcoat, with good gloss and colour retention. BBA Cert No. 08/H135-PS13. Highways Approved Item No.169.
A 2 pack epoxy undercoat, pigmented with MIO (micaceous iron oxide). Network Rail Item No. 7.2.2 and 7.1.7.
A high build, 2 pack epoxy, zinc phosphate primer / build coat for the anti corrosive protection of carbon steel surfaces. LUL, M24, N20, M20, approve...
A high end surface tolerant epoxy mastic coating for less severe exposures or when shorter maintenance intervals are expected in tougher environments....
A fast drying, two part amine cured epoxy zinc phosphate pigmented, high solids, high build product formulated for exposed structural steel.
A two pack acrylic isocyanate free topcoat with good gloss retention. Highways Approved Item No.168.
A hard wearing top coat for use in aggressive atmospheric exposure. Network Rail/Railtrack approved. Highways Approved Item No.169.
A two-pack polysiloxane topcoat with excellent gloss and colour retention. Network Rail/Railtrack approved. Highways Approved Item No. 185.
An industry approved topcoat for metal and coated surfaces subject to highly atmospheric environments.
A two component fast drying coating. Can be applied on steel, aluminium and concrete at sub zero surface temperatures.
A two component fast drying coating. Can be applied on steel, aluminium and concrete at sub zero surface temperatures.
A self-primed, surface tolerant coating with low temperature curing properties, low VOC and high film build.
A protective enamel coating for structures found in severe atmospheric conditions and is Network Rail approved.
A high solids 2 pack epoxy, pigmented with MIO (Micaceous Iron Oxide) certified under Highways Agency No112.
A fast drying, anti corrosive, high solids 2 part polyamide cured zinc rich epoxy coating.
A corrosion, abrasion, chemical and water resistant coating, suitable for interior and exterior use.
A two component acrylic polyurethane finish giving excellent durability and long term recoatability.
A low VOC, high solids, rapid cure primer/finish, offering excellent anti-corrosive protection and long term colour and gloss durability.
A two component, high build, acrylic polyurethane finish giving excellent durability and long term recoatability.
A two component, high solids, low VOC, epoxy zinc phosphate/micaceous iron oxide primer.
A two part, high solids, low VOC epoxy micaceous iron oxide intermediate coating.