C5 Environments

C5 Environment systems are suitable for coastal and offshore areas with high salinity. Internally, C5 environments are buildings or areas with almost permenant condensation and high pollution.

 

Scroll to the bottom of this page for a full list of suppliers and their specifications.


Download the manufacturer specifications for steel systems below:

Carboline | Hempel | International | Jotun | PPG | Selemix | Sherwin Williams | Sika | Teknos
Guide To Working In Confined Spaces

Shop By
Filter by
  1. Product Chemistry Solvent Based Remove This Item
Filter by

6 Items

Set Descending Direction
  1. Jotun Penguard Express ZP
    Jotun Penguard Express ZP

    A fast drying, two part amine cured epoxy zinc phosphate pigmented, high solids, high build product formulated for exposed structural steel.

    From £80.46 £67.05
  2. Jotun Penguard HSP ZP
    Jotun Penguard HSP ZP

    A two component amine cured epoxy coating designed for new construction where short dry to handle and over coating times are required.

    From £173.66 £144.72
  3. Jotun Barrier 90
    Jotun Barrier 90

    Two pack polyamide cured, zinc rich coating suitable for structural steel and piping exposed in corrosivity categories up to C5.

    From £270.71 £225.59
  4. Hempel Hempadur Speed-Dry ZP 500
    Hempel Hempadur Speed-Dry ZP 500

    A zinc phosphate 2 pack epoxy paint for use in corrosive environments within a Hempel coatings system.

    From £184.55 £153.79
  5. International Intergard 475HS
    International Intergard 475HS

    A low VOC, high solids, high build, two component epoxy coating.

    From £318.67 £265.56
  6. Selemix 7-413 2 Pack Epoxy Primer
    Selemix 7-413 2 Pack Epoxy Primer

    7-413 can be applied wet on wet to bare or galvanised steel, phosphate steel, light alloys, stainless or previously coated steel and GRP.

    From £118.28 £98.57
per page