£7.75 delivery on orders excluding certain products & postcodes *
Promain are able to offer the full range of paints specified by the Highways Agency known as Item numbers, these are paints that have been tested and approved for the Highways Agency providing them with a quality controlled range of products from manufactures such as PPG Sigma formally known as Ameron, Amercoat, Mebon and Mebopro. Other manufactures such as Leigh’s Paints who have now been acquired by Sherwin Williams, 3M, Hempel, Jotun, and Dacrylate Paints also offer a range of coatings that fit the Highways Agency criteria,
A one pack, high build bituminous coating for use behind linings and in cofferdams for the protection of enclosed steel. Highways Approved Item No.141...
Mordant wash solution formulated to give galvanised surfaces a chemical pre treatment. Highways Item No.155.
A two pack epoxy sealer pigmented with aluminium. Highways Approved Item 159.
A zinc phosphate pigmented 2 pack epoxy, temporary protective primer for steel surfaces. Highways Agency Item No.110
A two component topcoat for the protection of structural steel in severely corrosive atmospheric environments.
A two component coating for use in atmospheric and immersed environments.
A hard wearing top coat for use in aggressive atmospheric exposure. Network Rail approved. Highways Approved Item No 168
Formerly Amercoat 450E, Amercoat 450S. A two pack PU Gloss Finish for steel. Item No.168. M24(XM92).
A two component high solids aluminium pigmented polyamine cured modified epoxy primer. Highways Item 115.
A 2 pack high build semigloss aliphatic acrylic polyurethane finish, Highways Approved Item No.169.
This product is now discontinued. Formerly Amercoat 4613. Highways Approved Item 112.
A high build, 2 pack epoxy, zinc phosphate primer buildcoat for the anti corrosive protection of carbon steel surfaces.
Transgard TG121/Epigrip K267 two pack epoxy high solids Micaceous Iron Oxide (MIO) Highway Agency Item No.121. N9/038 Protective system reference
An intermediate or finishing coat epoxy system for use in atmospheric exposures. BBA Cert No.08/H135-PS7. Highways Approved Item No.112
This product is now discontinued. See PPG Sigmadur 540 as a potential alternative.
A hard wearing top coat for use in aggressive atmospheric exposure. Network Rail/Railtrack approved. Highways Approved Item No.169.
A self-primed, surface tolerant coating with low temperature curing properties, low VOC and high film build.
A high solids 2 pack epoxy, pigmented with MIO (Micaceous Iron Oxide) certified under Highways Agency No112.
A two component acrylic polyurethane finish giving excellent durability and long term recoatability.
A two pack epoxy zinc phosphate primer, primarily formulated to meet the requirements of the UK Highways Agency specification.
A two component, high build, acrylic polyurethane finish giving excellent durability and long term recoatability.
A two pack, epoxy acrylic isocyanate free cosmetic finish providing good long term durability as a finish coat.
For use on a wide variety of substrates including hand prepared rusty steel.
A two-component semi-gloss acrylic polyurethane topcoat, cured with aliphatic isocyanate, with good gloss and colour retention.
A pre-treatment etch solution for new galvanised steel. BBA Cert. no. 08/H135-PS10. Highways Approved Item No. 155
A flexible coating with good abrasion and impact resistance. BBA Cert No. 08/H135-PS5. Highways Approved Item No.110